Sistema de puertas de alto rendimiento
La serie Clopay Extreme™ combina una durabilidad de alta resistencia con la capacidad de abrirse a 24″ por segundo. Impulsadas por el robusto abridor LiftMaster, las puertas comerciales de la serie Extreme™ son ideales para instalaciones de emergencia, almacenes de centros de distribución, concesionarios de automóviles y mucho más.
<br><br>
Fabricadas con herrajes de alta resistencia, estas puertas seccionales de bajo mantenimiento cuentan con una vida útil de resorte cinco veces mayor que una puerta seccional comercial promedio para un rendimiento óptimo.
| Max Width | 16’2″ |
| Max Height | 14’0″ |
| Max Door Weight | 1,000 lbs |
| Upward Travel | 24″ per second |
| Downward Travel | 15″ per second |
| Stiles | Double end stiles (standard) |
| Glazing Available | Tempered, insulated tempered, acrylic and polygal |
| Springs* | 50,000 cycle standard (Max cycles available on a single shaft line) |
| Track Size | 2″ angle mount track standard 3″ track where applicable |
| Track Type | Standard lift, high lift and full vertical |
| Warranty | Standard paint – 5 years Color Blast® finish – 5 years Material and workmanship – 1 year Hardware – 1 year |
| *Cycles can vary depending on door configuration. |
The Clopay Extreme™ Series High Performance Door System boasts an opening speed of 24″ per second, allowing productivity to flourish while also delivering a flawless aesthetic thanks to optional full-view windows. Tandem nylon rollers improve roller life and reduce running noise for smooth, quiet operation while safety stays top of mind with enhanced features such as 3′ of light curtain protection, a cable management system and standard cable tension monitor.
For operator specifications, click here.
| Model | Thickness | Spacing | R-Value | Max Width✭ | Max Height✭ |
| EX904 | 2-1/8″ | Equal width & spacing | N/A | 16’2″ | 14’0″ |
| EX904U | 2-1/8″ | Equal width & spacing | 3.8* | 16’2″ | 14’0″ |
| Model | Section Thickness | Emboss | Exterior Gauge | Section Design | Insulation | R-Value Solid* | R-Value w/Glass** | Thermal Break | Max Width✭ | Max Height✭ |
| EX3729 | 2″ | Stucco | 27 | Minor Ribbed | Polyurethane*** | 18.4 | 8.0 | Yes | 16’2″ | 14’0″ |
| EX3728 | 2″ | Stucco | 27 | Flush | Polyurethane*** | 18.4 | 8.0 | Yes | 16’2″ | 14’0″ |
| EX3709 | 1-3/8″ | Stucco | 27 | Minor Ribbed | Polyurethane*** | 12.9 | 5.9 | Yes | 16’2″ | 14’0″ |
| EX3708 | 1-3/8″ | Stucco | 27 | Flush | Polyurethane*** | 12.9 | 5.9 | Yes | 16’2″ | 14’0″ |
| EX3209 | 2″ | Stucco | 24 | Minor Ribbed | Polystyrene | 9.1 | 4.4 | Yes | 16’2″ | 14’0″ |
| EX3208 | 2″ | Stucco | 24 | Flush | Polystyrene | 9.1 | 4.4 | Yes | 16’2″ | 14’0″ |
| EX3159 | 1-3/8″ | Stucco | 27 | Minor Ribbed | Polystyrene | 6.5 | 3.4 | Yes | 16’2″ | 14’0″ |
| EX3158 | 1-3/8″ | Stucco | 27 | Flush | Polystyrene | 6.5 | 3.4 | Yes | 16’2″ | 14’0″ |
Clopay’s proprietary polyurethane Intellicore insulation.
✭Maximum Width and Height values listed are Standard sizing.
| Model | Section Thickness | Emboss | Ext. Skin Pattern | Ext. Steel Gauge | R-Value* | Thermal Break | Max Width | Max Height | |
| EX3220 | 2″ | Stucco | Flush | 20 gauge | 9.1 | Thermally broken | 16’2″ | 14’0″ | |
| EX3213 | 2″ | Woodgrain | Raised panel | 24 gauge | 9.1 | Thermally broken | 16’2″ | 14’0″ | |
| EX3211 | 2″ | Woodgrain | Flush | 24 gauge | 9.1 | Thermally broken | 16’2″ | 14’0″ | |
| EX3200 | 2″ | Stucco | Minor Ribbed | 24 gauge | 9.1 | Thermally broken | 16’2″ | 14’0″ | |
| EX3150 | 1-3/8″ | Stucco | Minor Ribbed | 27 gauge | 6.5 | Thermally broken | 16’2″ | 14’0″ |
| Model | Thickness | Emboss | Exterior Steel | Pattern |  |
R-Value* | Std Max Width** | Std Max Height |
| EX3723 | 2″ | Woodgrain | 27 Gauge | Raised Panel | |
18.4 | 16’2″ | 14’0″ |
| EX3721 | 2″ | Woodgrain | 27 Gauge | Flush | |
18.4 | 16’2″ | 14’0″ |
| EX3720 | 2″ | Stucco | 27 Gauge | Minor Ribbed |
|
18.4 | 16’2″ | 14’0″ |
| EX3717 | 1 3/4″ | Stucco | 27 Gauge | Minor Ribbed |
|
16.2 | 16’2″ | 14’0″ |
| EX3718 | 1 3/4″ | Stucco | 27 Gauge | Flush |
|
16.2 | 16’2″ | 14’0″ |
| EX3715 | 1 3/8″ | Stucco | 27 Gauge | Minor Ribbed |
|
12.9 | 16’2″ | 14’0″ |
*Calculated door section R-value is in accordance with DASMA TDS-163 **For sizes over 32’2″ wide consult factory for specific configuration requirements.
| Motor Design | 1.25 HP configuration serving single phase 115V/230V and 3-phase 230V configurations 3-phase 460/575V available with accessory transformer |
| Wall Controller | Separation of low and high voltage wiring – includes functionality of 3-button station, PLUS setting door profile, programming limits, diagnostics |
| Programming | Complete the following programming at floor level: set limits; choose door profiles for speed; set operating modes; select photo entrapment devices |
| Display | Provides textual status indications including – Absolute cycle count – Service cycle count – Diagnostics messages – Door/operator status |
| Cycle Counter | Re-settable cycle counter via the wall controller and/or through MyQ facility |
| Limit Settings | Simple electronic push-button setup via the wall controller |
Note: Extreme™ Series must have tempered glass
*Mirrored and laminate not available in 1/2″
Glass options above only available on full-view sections. Glass thickness available in 1/8″, 1/4″ and 1/2″. Tri-wall polycarbonate thickness available in 5/8″. Low-E available on insulated glass.
548ae53a7d064605ba828e996083958a.png?sfvrsn=beac9513_2 "CLEAR ALUMINUM (ANODIZED)")
41b0f13537a5432fac7f1b0bb02c62d9.png?sfvrsn=35fdd24d_2 "CHOCOLATE (PAINTED)")
*Additional cost and lead time may apply. The use of “Bronze (Painted)” is recommended due to slight color variation that may occur during the anodizing process.
Custom powder coat, Color Blast®, and anodized finishes available.
Premium finishing options include:
 19-1/2” x 16” |  42” x 16” |  Modern Slim Windows* |
*Available on models EX3728/EX3729 and EX3208/EX3209 only.
Models EX3728 and EX3729 are available with 1/8″ clear tempered, 1/8″ frosted tempered, 3/4″ insulated tempered and 3/4″ frosted insulated tempered glass. Additional glazing options include: matte, pebble, bronze tinted and impact rated window.
Premium finishing options include:
Click on appropriate icon to download To use the Spec Wizard, click here
| dwg | dxf | ||
|---|---|---|---|
| High Lift Track |  |
 |
 |
| Vertical Track | |
|
|
| Jamb Details | |
|
|
50,000 cycle spring standard
Option available for maximum cycles on a single shaft line
Springs are shot peened to improve resistance to fatigue
Helps improve hinge longevity
Thimble helps reduce wear and extend cable life
Long stem tandem rollers provide longer roller life and quiet door operation
Maintains tension on lift cable to prevent it from coming off of the drum
Helps prevent cable slack. Provided with standard lift track.
WindCode® reinforcement available up to W5 design pressure (DP) 36 PSF, depending on door size, configuration and exposure. Doors tested 50% greater than DP.
